SEN0610
24GHz Human Presence Detection Sensor, I2C and UART

- Operating Temperature
- -40~85℃
- Maximum Detection Range
- 12m
- Operating Frequency
- 24GHz
- Baud rate
- 9600
24GHz Human Presence Detection Sensor, I2C and UART
DFRobot Gravity Sensor & Actuator System
DFRobot SEN0610 24GHz mmWave sensor for human presence and motion detection up to 12 m, with I2C and UART interfaces.
Overview. The DFRobot SEN0610 (Gravity: mmWave C4001 24GHz) is a 24GHz millimeter-wave human presence sensor. It detects presence up to 8 m and motion up to 12 m.
Main characteristics. It uses FMCW modulation, with a beam angle of 100*80°. Its size is 22*30 mm.
Interfaces and connectivity. The sensor communicates over I2C, with addresses 0x2A/0x2B, and over UART at 9600 baud. It uses the Gravity interface (PH2.0).
Power and environment. It operates at 3.3 V or 5 V and supports an operating temperature range of -40 to 85 ℃.
Typical uses. It is suited to human presence detection, environmental monitoring and real-time monitoring projects.
Integration. It is compatible with Arduino, Raspberry Pi and ESP32 / ESP8266 development boards.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0610, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Baud rate | 9600 |
| Beam Angle | 100*80° |
| Gravity | mmWave C4001 24GHz Human Presence Detection Sensor (12 Meters, I2C & UART) |
| I2C Address | 0x2A/0x2B |
| Maximum Detection Range | 12m |
| Modulation Mode | FMCW |
| Operating Frequency | 24GHz |
| Operating Temperature | -40~85℃ |
| Operating Voltage | 3.3V/5V |
| Size | 22*30mm |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0610. For a missing document or a specific revision, our experts send it to you.
DFRobot SEN0610 24GHz mmWave sensor for human presence and motion detection up to 12 m, with I2C and UART interfaces.
| Parameter | Value |
|---|---|
| Baud rate | 9600 |
| Beam Angle | 100*80° |
| Gravity | mmWave C4001 24GHz Human Presence Detection Sensor (12 Meters, I2C & UART) |
| I2C Address | 0x2A/0x2B |
| Maximum Detection Range | 12m |
| Modulation Mode | FMCW |
| Operating Frequency | 24GHz |
| Operating Temperature | -40~85℃ |
| Operating Voltage | 3.3V/5V |
| Size | 22*30mm |
Points to check before using SEN0610 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Voltage | 3.3V/5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0610 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": mmWave C4001 24GHz Human Presence Detection Sensor (12 Meters, I2C & UART).
-40~85℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
24GHz Human Presence Detection Sensor, I2C and UART

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0610 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details