SEN0656
1-Wire K-Type Thermocouple Amplifier for Temperature Measurement

Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
1-Wire K-Type Thermocouple Amplifier for Temperature Measurement
DFRobot Gravity Sensor & Actuator System
K-type thermocouple signal conditioning module with 1-Wire single-bus interface for measuring extreme temperatures from -270℃ to +1372℃ at 14-bit resolution.
Overview. The DFRobot CT1780, reference SEN0656, is a K-type thermocouple amplifier that digitizes the output of a K-type probe to measure temperatures from -270℃ to +1372℃. It sends readings through a Gravity single-bus interface.
Main characteristics. The module provides 14-bit resolution, equal to 0.25℃, and a measurement error of less than or equal to ±2℃ between -200℃ and 700℃, then ±4℃ between 700℃ and 1350℃. The board measures 44*22 mm and operates from a 3.3 to 5.5 V DC supply.
Interfaces and connectivity. Communication uses the 1-Wire protocol, similar to the architecture of the DS18B20. Several modules share a single data line while keeping independent addresses, which reduces wiring and microcontroller I/O usage. An onboard DIP switch allows each module to be identified when several boards operate on the same line.
Typical uses. The module suits distributed high-temperature monitoring, for example in industrial ovens, laboratory furnaces or heating chambers with several measurement zones.
Integration. The CT1780 connects to an Arduino-type controller following the wiring diagram provided by the manufacturer.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for SEN0656. For a missing document or a specific revision, our experts send it to you.
K-type thermocouple signal conditioning module with 1-Wire single-bus interface for measuring extreme temperatures from -270℃ to +1372℃ at 14-bit resolution.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
1-Wire K-Type Thermocouple Amplifier for Temperature Measurement

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0656 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details