Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

BMP585 – I2C/UART Barometric Pressure and Temperature Sensor

I2C/UART Barometric Pressure and Temperature Sensor

DFRobot Gravity Sensor & Actuator System

Manufacturer part number
SEN0664
Manufacturer
DFRobot

DFRobot BMP585 digital barometric pressure and temperature sensor with gel-filled cavity, resistant to water and chemicals, for altitude measurement and weather monitoring in outdoor environments.

Product overview

Overview. The DFRobot Gravity: BMP585 (SEN0664) is a digital barometric pressure and temperature sensor based on the Bosch BMP585 chip. Its gel-filled cavity and industrial protective cover allow it to resist water, humidity and corrosive chemicals.

Main characteristics. The sensor measures absolute pressure from 30 to 125 kPa with a typical absolute accuracy of ±0.3 hPa and a typical relative pressure accuracy of ±0.06 hPa per 10 kPa. Relative altitude accuracy is ±0.5 m per 10 kPa. The temperature measurement range is 0 to 65 °C, with a temperature drift coefficient of ±0.5 Pa/K. Noise is below 0.1 Pa (RMS, without low-pass filter enabled) and pressure data resolution is 1/64.

Interfaces and connectivity. The module communicates over I2C or UART. The default I2C address is 0x47, with 0x46 as the alternative. It is available in PH2.0-4P Gravity pinout or on a 2.54 mm pin header socket.

Power and environment. The sensor operates from a DC supply of 3.3 to 5 V, drawing an operating current of 700 µA. Its PCB measures 32 × 27 × 7.18 mm, with 3.0 mm mounting holes spaced 25 × 20 mm apart.

Typical uses. This sensor suits drone altitude stabilisation, outdoor meteorological monitoring and precision navigation systems requiring long-term stability in demanding conditions.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote