SEN0665
High-precision barometric pressure sensor, I2C/UART

Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
High-precision barometric pressure sensor, I2C/UART
DFRobot Gravity Sensor & Actuator System
DFRobot digital barometric pressure and temperature sensor based on the Bosch BMP581, designed for relative altitude measurement and environmental monitoring, with I2C and UART interfaces.
Overview. The DFRobot Gravity BMP581 (SEN0665) is a digital barometric pressure and temperature sensor based on the Bosch BMP581. It comes as a Gravity module with a PH2.0-4P connector and a 2.54 mm pin header socket.
Main characteristics. Absolute pressure accuracy is ±0.3 hPa (typ.) and relative pressure accuracy is ±0.06 hPa/10 kPa (typ.). The pressure measurement range is 30 to 125 kPa with a data resolution of 1/64, and the temperature measurement range is 0 to 65 °C. Noise is below 0.1 Pa RMS without the low-pass filter enabled, and the temperature drift coefficient is ±0.5 Pa/K. Relative altitude accuracy is ±0.5 m per 10 kPa.
Interfaces and connectivity. The module communicates over I2C or UART. The default I2C address is 0x47, with 0x46 as the alternative address.
Power and environment. The module operates from a DC supply of 3.3 to 5 V with an operating current of 700 µA. Its PCB measures 32 × 27 × 7.18 mm, with 3.0 mm mounting holes spaced 25 × 20 mm apart.
Typical uses. Its relative altitude accuracy and low current consumption make it suitable for drone altitude hold and elevation tracking in battery-powered embedded projects.
Integration. It connects directly to a microcontroller through the Gravity connector or the pin header socket, over I2C or UART depending on the wiring chosen.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for SEN0665. For a missing document or a specific revision, our experts send it to you.
DFRobot digital barometric pressure and temperature sensor based on the Bosch BMP581, designed for relative altitude measurement and environmental monitoring, with I2C and UART interfaces.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
High-precision barometric pressure sensor, I2C/UART

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0665 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details