STCC4 – STCC4 Thermal Conductivity CO2 Sensor with I2C

STCC4 Thermal Conductivity CO2 Sensor with I2C

DFRobot Gravity Sensor & Actuator System

  • 10°C ~ 40°C
  • 400–5000 ppm
  • Gravity I2C
  • 3.3–5.0 V DC
Manufacturer part number
SEN0678
Manufacturer
DFRobot
Operating Temperature
10°C ~ 40°C
CO₂ Measurement Range
400–5000 ppm

CO2 sensor module combining the STCC4 chip and an SHT40 to measure CO2, temperature and humidity simultaneously, for indoor air quality monitoring.

Product overview

DFRobot STCC4 CO2 sensor. The DFRobot Gravity STCC4 is a 3-in-1 carbon dioxide sensor, reference SEN0678, designed for air quality monitoring and rapid integration into electronic systems.

Measurement. The sensor applies the thermal conductivity (TC) principle of the Sensirion STCC4 chip to measure CO2 concentration between 400 and 5000 ppm, with an accuracy of ±(100 ppm + 10% of reading). An integrated SHT40 provides ambient temperature and relative humidity in parallel.

Interface and power. Communication is carried out over a Gravity I2C interface, without soldering. The supply voltage is 3.3 to 5.0 V DC, with low power consumption suited to battery-powered or always-on systems.

Operating conditions. The module operates between 10 °C and 40 °C, at 20% to 80% RH non-condensing. The response time is 20 s.

Typical uses. Indoor air quality monitoring in buildings and classrooms, IoT nodes for environmental monitoring, smart home systems coupled with ventilation, air conditioning or window control, and STEM educational projects.

Integration. Its compact size and Gravity connector allow integration into modular architectures with limited space.

See all specifications

Highlights

  • Supply voltage: 3.3–5.0 V DC
  • Response time: 20 s
  • Building and classroom monitoring: Ensures air safety in high-occupancy environments
  • CO₂ Accuracy: ±(100 ppm + 10% of reading)
  • CO₂ Measurement Range: 400–5000 ppm
  • Compact size: Easy to integrate into space-constrained and modular design

Good to know before integrating

  • Power: plan for a supply compatible with 3.3–5.0 V DC.
  • Thermal: rated operating range 10°C ~ 40°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote