SEN0682
64×8 matrix dToF 3D LiDAR sensor (512 points, 120°H×20°V, UART/USB)

- Data interface
- UART / USB
- Supply voltage
- 5 V
- Operating Current
- 80 mA
- Mounting Hole
- 3.0mm diameter
64×8 matrix dToF 3D LiDAR sensor (512 points, 120°H×20°V, UART/USB)
DFRobot Gravity Sensor & Actuator System
Full-solid-state 64×8 matrix dToF 3D LiDAR sensor (512 points) featuring a 120°H × 20°V field of view, up to 5000 mm ranging capability, and dual UART/Type-C interfaces.
Overview. DFRobot offers the Gravity SEN0682 full-solid-state 3D LiDAR sensor utilizing Direct Time-of-Flight (dToF) laser ranging at a 905 nm wavelength. Its 64 × 8 matrix simultaneously captures 512 ranging points at an 8fps full-frame rate for robot forward obstacle avoidance and blind spot detection.
Ranging Capability and Field of View. Featuring a 120° horizontal by 20° vertical field of view (beyond 0.5m), this sensor performs continuous measurement across 100 – 5000 mm (5m on a 90 % reflective panel indoors at 750 lux) with a 14 mm resolution and strong resistance to ambient light interference.
Interfaces and Integration. Powered by 5 V (80 mA operating current, 3.3 V logic level), the module provides both a PH2.0‑4P UART interface (921600 bps default baud rate) for embedded controllers and a USB Type‑C port for PC visualization. It measures 62 × 26 × 24 mm, weighs 19.6g, and includes 3.0mm mounting holes.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0682, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Supply voltage | 5 V |
| Connector Type | PH2.0‑4P / Type‑C |
| Data interface | UART / USB |
| Default Serial Baud Rate | 921600 bps |
| Dual Interface | UART (Embedded) & Type-C (PC Visualization) |
| Gravity | 64×8 Matrix dToF 3D LiDAR Sensor (512 Points, 120°H × 20°V, UART/USB) |
| Laser wavelength | 905 nm |
| Logic Level Voltage | 3.3 V |
| Matrix Size | 64 × 8 total 512 ranging points |
| Module size | 62 × 26 × 24 mm |
| Mounting Hole | 3.0mm diameter |
| Operating Current | 80 mA |
| Ranging Mode | Continuous measurement |
| Ranging Range | 100 – 5000 mm @ 90 % reflective panel / indoor, 750 lux |
| Ranging Resolution | 14 mm |
| Weight | 19.6g |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0682. For a missing document or a specific revision, our experts send it to you.
Full-solid-state 64×8 matrix dToF 3D LiDAR sensor (512 points) featuring a 120°H × 20°V field of view, up to 5000 mm ranging capability, and dual UART/Type-C interfaces.
| Parameter | Value |
|---|---|
| Supply voltage | 5 V |
| Connector Type | PH2.0‑4P / Type‑C |
| Data interface | UART / USB |
| Default Serial Baud Rate | 921600 bps |
| Dual Interface | UART (Embedded) & Type-C (PC Visualization) |
| Gravity | 64×8 Matrix dToF 3D LiDAR Sensor (512 Points, 120°H × 20°V, UART/USB) |
| Laser wavelength | 905 nm |
| Logic Level Voltage | 3.3 V |
| Matrix Size | 64 × 8 total 512 ranging points |
| Module size | 62 × 26 × 24 mm |
| Mounting Hole | 3.0mm diameter |
| Operating Current | 80 mA |
| Ranging Mode | Continuous measurement |
| Ranging Range | 100 – 5000 mm @ 90 % reflective panel / indoor, 750 lux |
| Ranging Resolution | 14 mm |
| Weight | 19.6g |
Points to check before using SEN0682 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Supply voltage | 5 V |
| Logic Level Voltage | 3.3 V |
| Operating Current | 80 mA |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0682 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Data interface": UART / USB.
5 V (source: Supply voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
64×8 matrix dToF 3D LiDAR sensor (512 points, 120°H×20°V, UART/USB)

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0682 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details