SEN0697 – Compact 10DOF IMU sensor with I2C interface

Compact 10DOF IMU sensor with I2C interface

Educational STEM Coding & Sensor Starter Packs

  • ±2000 µT
  • 30 kPa ~ 125 kPa
  • -40 °C ~ +85 °C
  • I²C
Manufacturer part number
SEN0697
Manufacturer
DFRobot
Measurement Range
±2000 µT
Pressure Measurement Range
30 kPa ~ 125 kPa

Compact 10DOF IMU module combining accelerometer, gyroscope, magnetometer and barometric pressure sensing for motion detection, heading and altitude measurement.

Product overview

Overview. The DFRobot SEN0697 is a 10DOF IMU sensor breakout measuring 24 × 19 mm that combines acceleration, angular velocity, magnetic field and barometric pressure sensing on one board with an I2C interface.

Main characteristics. The accelerometer provides 16-bit ADC resolution with ranges from ±2 g to ±16 g. The gyroscope covers ±125 to ±2000 °/s with 16-bit resolution. The magnetometer measures ±2000 µT with approximately 0.1 µT resolution. The pressure sensor covers 30 to 125 kPa with approximately 0.0156 Pa resolution.

Interfaces and connectivity. I²C communication, SH1.0-5P connector and 2.54 mm pin header holes, four programmable interrupt pins. Mounting holes of 2 mm with 19 mm spacing.

Power and environment. Operating voltage of 3.3 V, current of 1.12 mA in normal operation and 0.37 mA in low-power mode. Temperature range from -40 °C to +85 °C.

Typical uses. Embedded robots, portable data logging, altitude change tracking through pressure variation and custom motion or sensor-fusion algorithms.

Integration. Normal periodic measurement, triggered forced measurement and low-power sleep standby modes. An Arduino library simplifies integration with compatible boards, including ESP32.

See all specifications

Highlights

  • Accelerometer ADC Resolution: 16-bit
  • Accelerometer Measurement Ranges: ±2 g, ±4 g, ±8 g, ±16 g
  • Accelerometer Sensitivity Error: ±0.5%
  • Accelerometer Zero-g Offset: ±50 mg
  • Communication interface: I²C
  • Connector Type: SH1.0-5P connector / 2.54 mm pin header holes

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote