Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SEN0704 – 6×6 Flexible Array Tactile Pressure Sensor with UART

6×6 Flexible Array Tactile Pressure Sensor with UART

DFRobot Gravity Sensor & Actuator System

Manufacturer part number
SEN0704
Manufacturer
DFRobot

Flexible matrix pressure sensor with 36 sensing points over a 15 × 15 mm area, designed for robotic grippers, wearable devices and human-computer interaction.

Product overview

Overview. The DFRobot SEN0704 is a flexible tactile pressure array sensor, using FSR (Force Sensing Resistor) technology, that integrates 36 independent sensing points within a 15 × 15 mm sensing area. It is intended for intelligent gripping systems, human-computer interaction and research projects.

Main characteristics. The sensor is arranged as a matrix of 6 columns and 6 rows. Each point measures compression pressure, with a range of 20 g to 5 kg per point and a trigger force of 20 g. The sampling frequency is 20 Hz or 50 Hz, and durability is rated at more than 1,000,000 times at 1 kg force.

Interfaces and connectivity. Communication is via UART, which allows several sensors to be cascaded and reduces wiring. The adapter board measures 20 × 12 mm and the sensor is connected through a flexible cable.

Power and environment. The sensor operates at 5 V and supports an operating temperature range of -20 °C to +65 °C.

Typical uses. Its thin, bendable profile allows integration into a robotic gripper or a DIY dexterous hand, or mounting on a wearable device to map force distribution.

Integration. The UART interface connects to a compatible development board, using the host software provided by the manufacturer for data acquisition.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote