TEL0112 – 315 MHz ASK superheterodyne RF receiver module

315 MHz ASK superheterodyne RF receiver module

DFRobot Gravity Sensor & Actuator System

  • 0~+70℃
  • PH2.0-3pin
  • 315MHz
  • 50 ohms
Manufacturer part number
TEL0112
Manufacturer
DFRobot
Operating Temperature
0~+70℃
Module Interface
PH2.0-3pin

315 MHz radio receiver module with ASK modulation and superheterodyne demodulation, designed for short-range remote command reception and wireless control of embedded systems.

Product overview

Overview. The DFRobot TEL0112 is a 315 MHz RF receiver module with ASK superheterodyne architecture, built around the LR480 RF chip. It receives short-range wireless command signals in embedded systems.

Main characteristics. Typical sensitivity reaches -108 dBi, with a receive bandwidth of ±1.25 MHz (6 dB) and a maximum transfer rate of 9.6 kbps. The antenna impedance is 50 ohms and the transmission distance is 50 m with a 5 V power supply.

Decoding and addressing. An SC2272-L4 latch-type decoding chip provides address recognition. The 8-bit three-state address coding offers up to 6,561 combinations, and the module is compatible with the SC2260, SC2262, PT2260 and PT2262 encoder chips.

Interface and power. The module connects through a PH2.0-3pin interface and operates at 3.3 V or 5 V (maximum 5.5 V). The operating temperature range is 0 to +70 °C and the weight is 10 g.

Typical uses. The module suits integration into vehicle telecontrol systems, identification equipment and automated access devices, and connection to a microcontroller.

See all specifications

Highlights

  • Antenna Impedance: 50 ohms
  • Decoding Chip: SC2272-L4 latch type
  • Demodulation Mode: Superheterodyne type
  • Gravity: 315MHz RF Receiver Module (ASK, Superheterodyne)
  • Modulation Mode: Ask
  • Module Interface: PH2.0-3pin

Good to know before integrating

  • Thermal: rated operating range 0~+70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote