E32S3RGB5
ESP32-S3 development board with 5-inch touch TFT display

- LCD interface
- RGB 24bit
- Mabee interface
- 1I2C;1GPIO
- Arduino support
- yes
- Button
- Flash button and reset button
ESP32-S3 development board with 5-inch touch TFT display
Maker, Prototyping, Open-Hardware & Developer Boards
Makerfabs ESP32-S3 development board combining a 5-inch 800*480 IPS display with 5-point capacitive touch and an RGB 24-bit parallel interface, for IoT prototypes and embedded graphical interfaces.
Overview. The Makerfabs E32S3RGB5 is a MaTouch ESP32-S3 development board with a 5-inch parallel TFT touch display, intended for IoT prototypes and embedded graphical interfaces.
Main characteristics. The ESP32-S3-WROOM-1 module includes a PCB antenna, 16 MB of Flash memory and 8 MB of PSRAM. The high-brightness IPS display offers an 800*480 resolution with an RGB 24-bit interface. The 5-point capacitive touch panel is driven by a GT911 controller.
Interfaces and connectivity. The board provides two USB Type-C ports, one for USB-to-UART via a CP2104 chip and one for native USB. It includes a microSD slot, Flash and reset buttons, and a Mabee interface offering 1 I2C and 1 GPIO. Wireless connectivity is provided by Wi-Fi and Bluetooth 5.0.
Power and environment. Power is supplied through USB Type-C at 5.0 V (4.0 V to 5.25 V). The operating temperature range is -40 ℃ to +85 ℃. USB Type-C Power Delivery is not supported.
Integration. The board supports Arduino, which simplifies software development and the connection of sensors through the Mabee interface.
Typical uses. These characteristics suit home automation prototypes, dashboards and control interfaces, as well as data logging to a microSD card.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for E32S3RGB5, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Arduino support | yes |
| Button | Flash button and reset button |
| Controller | ESP32-S3-WROOM-1, PCB Antenna, 16MB Flash, 8MB PSRAM, ESP32-S3-WROOM-1-N16R8 |
| LCD | 5 inch High Lightness IPS |
| LCD interface | RGB 24bit |
| Mabee interface | 1I2C;1GPIO |
| microSD | Yes |
| Operation Temperature | -40℃ to +85℃ |
| Power supply | USB Type-C 5.0V(4.0V~5.25V) |
| Resolution | 800*480 |
| Touch Panel | 5 Points Touch, Capacitive |
| Touch Panel Driver | GT911 |
| Type-C Power Delivery | Not Supported |
| USB | Dual USB Type-C(one for USB-to-UART and one for native USB) |
| USB to UART Chip | CP2104 |
| Wireless | Wifi& Bluetooth 5.0 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for E32S3RGB5. For a missing document or a specific revision, our experts send it to you.
Makerfabs ESP32-S3 development board combining a 5-inch 800*480 IPS display with 5-point capacitive touch and an RGB 24-bit parallel interface, for IoT prototypes and embedded graphical interfaces.
| Parameter | Value |
|---|---|
| Arduino support | yes |
| Button | Flash button and reset button |
| Controller | ESP32-S3-WROOM-1, PCB Antenna, 16MB Flash, 8MB PSRAM, ESP32-S3-WROOM-1-N16R8 |
| LCD | 5 inch High Lightness IPS |
| LCD interface | RGB 24bit |
| Mabee interface | 1I2C;1GPIO |
| microSD | Yes |
| Operation Temperature | -40℃ to +85℃ |
| Power supply | USB Type-C 5.0V(4.0V~5.25V) |
| Resolution | 800*480 |
| Touch Panel | 5 Points Touch, Capacitive |
| Touch Panel Driver | GT911 |
| Type-C Power Delivery | Not Supported |
| USB | Dual USB Type-C(one for USB-to-UART and one for native USB) |
| USB to UART Chip | CP2104 |
| Wireless | Wifi& Bluetooth 5.0 |
Answers to the questions that the recorded characteristics of E32S3RGB5 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Wireless": Wifi& Bluetooth 5.0.
Yes — recorded under "Wireless": Wifi& Bluetooth 5.0.
Yes — recorded under "Power supply": USB Type-C 5.0V(4.0V~5.25V).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
ESP32-S3 development board with 5-inch touch TFT display

MaTouch ESP32-S3 Parallel TFT with Touch 7“

MaTouch ESP32-S3 Round SPI TFT with Touch 1.28"

MaTouch ESP32-S3 Parallel TFT with Touch 3.5'' ILI9488

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | E32S3RGB5 |
| Manufacturer | Makerfabs |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Boost converter module 3.3 V to 12 V 50 mA · Ref. : 110155
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details