RAK4270 – LoRaWAN STM32L071 and SX1262 module, MHF connector, CN470 band

LoRaWAN STM32L071 and SX1262 module, MHF connector, CN470 band

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • CN470
  • UART/I2C/GPIO
Manufacturer part number
312015
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

RAK4270 LoRaWAN module from RAKwireless, compact and low power, designed for long-range LoRa networks and point-to-point communications in the CN470 band.

Product overview

RAKwireless RAK4270. The RAK4270 is a RAKwireless Sub-GHz LoRaWAN module built around an STM32L071 microcontroller and an SX1262 LoRa transceiver. It complies with the LoRaWAN 1.0.2 protocol and is controlled through a UART interface using AT commands.

Main characteristics. The module supports eight spreading factors, from SF5 to SF12, and a signal bandwidth from 7.8 kHz to 500 kHz. Its receive sensitivity reaches about -138 dBm and its maximum transmit output power is 21 dBm in PA_BOOST mode. It is supplied with an MHF connector, the RF pinout being disconnected.

Interfaces and connectivity. The module provides a UART interface for AT commands, an I2C interface and GPIO pins. The SWDIO and SWCLK programming pins allow firmware updates, and the MCU_NRST pin resets the microcontroller.

Power and environment. The supply voltage ranges from 2.0 to 3.6 V. Typical consumption is 2.19 µA in the EU868 band and 2.31 µA in the US915 band at 3.3 V. The operating temperature range is -40 °C to +85 °C. The module measures 15 x 15.5 x 2.5 mm.

Typical uses. This module suits LoRaWAN networks and LoRa point-to-point links requiring long-range data acquisition and low power consumption.

Integration. The module is a 20-pin stamp format board intended for SMT soldering onto a printed circuit board. It is certified CE, FCC, KC, REACH and RoHS.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: CN470
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote