RAK4270 – Sub-GHz LoRaWAN module STM32L071 SX1262 without MHF, CN470 band

Sub-GHz LoRaWAN module STM32L071 SX1262 without MHF, CN470 band

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • CN470
  • UART/I2C/GPIO
Manufacturer part number
312018
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

The RAKwireless RAK4270 is a low-power sub-GHz LoRaWAN module controlled through AT commands over UART, intended for long-range LoRa networks and point-to-point LoRa communications.

Product overview

Overview. The RAKwireless RAK4270 LoRaWAN module is a sub-GHz stamp module integrating an STM32L071 microcontroller and an SX1262 LoRa chip. This CN470 variant ships without an MHF connector, the antenna being connected through the RF pins.

Main characteristics. The SX1262 supports eight spreading factors, from SF5 to SF12, with an adjustable signal bandwidth from 7.8 kHz to 500 kHz. Current consumption is 1.74 μA in EU868 and 1.61 μA in US915 at 2.0 V, with a maximum transmit output power of 21 dBm on PA_BOOST. Receive sensitivity in LoRa modulation is about -138 dBm. The module complies with the LoRaWAN 1.0.2 protocol and supports LoRa point-to-point communications.

Interfaces and connectivity. The module provides a UART interface for AT commands, an I2C interface and GPIO pins. The AT commands control the state of the module as well as the LoRaWAN communication parameters and payloads.

Power and environment. The supply voltage ranges from 2.0 to 3.6 V and the operating temperature range is -40 °C to +85 °C. Dimensions are 15 x 15.5 x 2.5 mm (LxWxH), and the module holds CE, FCC, KC, REACH and RoHS certifications.

Typical uses. This module suits long-range, low-power data acquisition applications such as smart meters, supply chain and logistics tracking, agricultural sensors and smart cities.

Integration. A breakout board gives access to the module pins through 2.54 mm headers, which simplifies debugging. The module is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: CN470
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote