RAK4270 – Sub-GHz LoRaWAN module with STM32L071 and SX1262, 2.0 to 3.6 V

Sub-GHz LoRaWAN module with STM32L071 and SX1262, 2.0 to 3.6 V

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • IN865
  • UART/I2C/GPIO
Manufacturer part number
314015
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

The RAK4270 is a low-power sub-GHz LoRaWAN module, controlled by AT commands over UART, for long-range LoRa networks and point-to-point links.

Product overview

Overview. The RAK4270 LoRaWAN module from RAKwireless, in the IN865 version without MHF connector (antenna via the RF pinout), is a compact 15 x 15.5 x 2.5 mm sub-GHz module combining an STM32L071 microcontroller and an SX1262 LoRa chip. It complies with the LoRaWAN 1.0.2 protocol.

Main characteristics. The SX1262 supports eight spreading factors, from SF5 to SF12, and a signal bandwidth between 7.8 kHz and 500 kHz, with a data rate of 0.018 to 62.5 kb/s. Sensitivity in LoRa modulation reaches -138 dBm and maximum output power is 22 dBm on PA_BOOST. Consumption is 2.31 μA typical at 3.3 V, and 1.61 μA at 2.0 V in the US915 condition.

Interfaces and connectivity. The module is controlled by an external controller through an AT command UART interface, complemented by an I2C interface and GPIO pins. It has 20 stamp pads for SMT board-to-board soldering. The STM32L071 provides an Arm Cortex-M0+ 32-bit RISC core, 128 kb of flash memory with ECC, 20 kb of RAM and 6 kb of data EEPROM with ECC.

Power and environment. The supply voltage ranges from 2.0 to 3.6 V and the operating temperature range is -40°C to +85°C. The module is certified CE, FCC, KC, REACH and RoHS.

Typical uses. The module suits applications requiring long-range data acquisition and low power consumption, such as smart meters, supply chain tracking, agricultural sensors and smart cities.

Integration. A breakout board gives access to the module pins through two rows of 2.54 mm headers, which simplifies debugging.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: IN865
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote