RAK4270 – Sub-GHz LoRaWAN Module 868 MHz, Low Power

Sub-GHz LoRaWAN Module 868 MHz, Low Power

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • EU868
  • UART/I2C/GPIO
Manufacturer part number
315022
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

The RAK4270 is a low-power sub-GHz LoRaWAN module from RAKwireless, controlled through AT commands over UART, for long-range LoRa networks and point-to-point communications.

Product overview

Overview. The RAK4270 LoRaWAN module from RAKwireless combines an STM32L071 microcontroller and an SX1262 radio chip in a compact 15 x 15.5 x 2.5 mm form factor for the EU868 frequency. An external controller drives it through its UART interface, using AT commands that manage the module state as well as the LoRaWAN communication parameters and payloads.

Main characteristics. The module supports eight spreading factors, SF5 to SF12, and a signal bandwidth of 7.8 kHz to 500 kHz, with a data rate of 0.018 to 62.5 kb/s. Transmit output power reaches 21 dBm on PA_BOOST, and typical consumption in EU868 at 3.3 V is 2.19 μA. On reception, sensitivity is about -138 dBm in LoRa modulation.

Interfaces and connectivity. The module provides UART ports for AT commands, an I2C interface and GPIO pins, together with an SWD programming interface. It is designed for SMT soldering on a 20-pin stamp pad. It complies with the LoRaWAN 1.0.2 protocol.

Power and environment. The supply voltage ranges from 2.0 to 3.6 V and the operating temperature range is -40 °C to +85 °C. The product is certified CE, FCC, KC, REACH and RoHS.

Typical uses. The module suits low-power, long-range data acquisition applications such as smart meters, supply chain tracking, agricultural sensors and smart cities.

Integration. A breakout board gives access to the module pins through 2.54 mm headers to simplify debugging.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: EU868
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote