RAK4270 – LoRaWAN STM32L071 SX1262 module with MHF connector, US915 band

LoRaWAN STM32L071 SX1262 module with MHF connector, US915 band

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • US915
  • UART/I2C/GPIO
Manufacturer part number
316014
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

The RAK4270 is a US915 LoRaWAN module from RAKwireless, compact and very low power, designed for LoRa networks and point-to-point communications.

Product overview

Overview. The RAK4270 from RAKwireless is a LoRaWAN stamp module built around an STM32L071 microcontroller and an SX1262 chip, operating in the US915 frequency band. It ships with an MHF connector, the RF pin being disconnected on this variant.

Main characteristics. The module draws 1.61 µA at 2.0 V and 2.31 µA typical at 3.3 V for the US915 band. In transmit mode the output power is 21 dBm with a current of 124 mA on PA_BOOST, and receive consumes 15 mA. It operates over a temperature range of -40°C to +85°C.

Interfaces and connectivity. The module provides a UART interface for AT commands, an I2C interface and GPIO pins. The pins include UART2_RX, UART2_TX, I2C_SCL and I2C_SDA, together with the SWDIO and SWCLK programming signals.

Power and environment. The supply voltage ranges from 2.0 to 3.6 V. The module measures 15 x 15.5 x 2.5 mm (LxWxH) and is certified CE, FCC, KC, REACH and RoHS.

Typical uses. The module is controlled by an external controller through its UART interface, using AT commands that manage the module state as well as the LoRaWAN communication parameters and payloads.

Integration. The RAK4270 is surface-mounted on a printed circuit board through its 20-pin stamp format. It is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: US915
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote