RAK4270 – US915 LoRaWAN module without MHF connector, antenna via RF pinout

US915 LoRaWAN module without MHF connector, antenna via RF pinout

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • US915
  • UART/I2C/GPIO
Manufacturer part number
316015
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

RAK4270 LoRaWAN module, 15 x 15.5 x 2.5 mm, US915 band, controlled by AT commands over UART, for LoRa networks and point-to-point communications.

Product overview

RAK4270. The RAKwireless RAK4270 LoRaWAN module integrates an STM32L071 microcontroller and an SX1262 radio chip for LoRa modulation, in the US915 variant without MHF connector, the antenna being connected via the RF pinout.

Main characteristics. The module supports spreading factors SF5 to SF12, an adjustable signal bandwidth from 7.8 kHz to 500 kHz and a data rate of 0.018 to 62.5 kb/s. It complies with the LoRaWAN 1.0.2 protocol. In transmit mode, the output power reaches 21 dBm, with a current of 124 mA on PA_BOOST. In receive mode, the current is 15 mA and the sensitivity is around -138 dBm.

Power consumption and supply. In sleep, the typical consumption is 2.31 μA at 3.3 V in US915 (1.61 μA minimum at 2.0 V). The supply voltage ranges from 2.0 to 3.6 V and the operating temperature range is -40 °C to +85 °C.

Interfaces and connectivity. The module provides a UART dedicated to AT commands, an I2C interface and GPIO pins. It is driven by an external controller that sends AT commands to manage its state as well as the LoRaWAN parameters and payloads. The SWDIO and SWCLK programming pins and the MCU_NRST reset pin are accessible.

Typical uses. The module suits long-range, low-power data acquisition applications such as smart meters, supply chain and logistics tracking, agricultural sensors and smart cities.

Integration. The compact 15 x 15.5 x 2.5 mm form factor is board-to-board soldered by SMT on 20 pins. The module is certified CE, FCC, KC, REACH and RoHS. It is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: US915
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote