RAK4270 – STM32L071 SX1262 LoRaWAN module with MHF connector

STM32L071 SX1262 LoRaWAN module with MHF connector

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • AU915
  • UART/I2C/GPIO
Manufacturer part number
317015
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

The RAK4270 is a compact LoRaWAN module from RAKwireless with an STM32L071 MCU and SX1262 chip, controlled by AT commands over UART for long-range, low-power data transmission.

Product overview

Overview. The RAKwireless RAK4270 is a sub-GHz LoRaWAN module built around an STM32L071 MCU and an SX1262 LoRa chip, in a compact 15 x 15.5 x 2.5 mm form factor. This version is supplied for the AU915 band.

Main characteristics. The module supports spreading factors SF5 to SF12 and an adjustable signal bandwidth from 7.8 kHz to 500 kHz. Its typical consumption is 2.31 μA at 3.3 V in the AU915 band, and 1.61 μA at 2.0 V. In transmit mode, the output power reaches 21 dBm on PA_BOOST with a current of 124 mA. In receive mode, the current is 15 mA.

Interfaces and connectivity. The module provides a UART interface for AT commands, an I2C interface and GPIO pins. It also includes an MCU_NRST pin and SWDIO and SWCLK programming pins. This version has an MHF connector, the RF pinout being disconnected.

Power and environment. The supply voltage is 2.0 to 3.6 V and the operating temperature range is -40°C to +85°C. The module is certified CE, FCC, KC, REACH and RoHS.

Typical uses. The module suits long-range, low-power data transmission, controlled by an external controller through UART and AT commands.

Integration. The RAK4270 is intended for board integration by SMT soldering, using its 20-pin stamp pad.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: AU915
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote