RAK4270 – LoRaWAN module with STM32L071 MCU and SX1262 chip, AS923

LoRaWAN module with STM32L071 MCU and SX1262 chip, AS923

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • AS923
  • UART/I2C/GPIO
Manufacturer part number
319013
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

The RAK4270 is a compact LoRaWAN module from RAKwireless, controlled through AT commands over a UART link, for low-power long-range LoRa networks.

Product overview

Overview. The RAK4270 LoRaWAN module from RAKwireless integrates an STM32L071 microcontroller and an SX1262 LoRa chip in a compact 15 x 15.5 x 2.5 mm form factor. It is controlled by an external controller through AT commands sent over its UART interface.

Main characteristics. The module supports eight spreading factors, from SF5 to SF12, and a signal bandwidth from 7.8 kHz to 500 kHz, with a data rate of 0.018 to 62.5 kb/s. Sensitivity reaches -138 dBm in LoRa modulation and transmit output power reaches 21 dBm. Consumption is 2.19 µA typical in EU868 and 2.31 µA typical in US915 at 3.3 V.

Interfaces and connectivity. The module provides a UART link for AT commands, an I2C interface and GPIO pins. The core is a 32-bit Arm Cortex-M0+ with 128 kb of flash memory with ECC, 20 kb of RAM and 6 kb of data EEPROM with ECC. The RAK4270 variant is given for the AS923 frequency, with an MHF connector and the RF pin disconnected. The module complies with the LoRaWAN 1.0.2 protocol.

Power and environment. The supply voltage ranges from 2.0 to 3.6 V and the operating temperature range is -40°C to +85°C. The module is certified CE, FCC, KC, REACH and RoHS.

Typical uses. The module suits LoRa networks and LoRa point-to-point communications, for example smart meter reading, supply chain and logistics tracking, agricultural sensors and smart cities.

Integration. A breakout board gives access to the module pins through two rows of 2.54 mm headers, for easier debugging. The SWDIO and SWCLK programming pins are exposed on the module.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: AS923
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote