RAK4270 – Sub-GHz LoRaWAN module with STM32L071 and SX1262, ultra-low power

Sub-GHz LoRaWAN module with STM32L071 and SX1262, ultra-low power

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • AS923
  • UART/I2C/GPIO
Manufacturer part number
319014
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

The RAK4270 is a sub-GHz LoRaWAN module from RAKwireless with low power consumption, controlled through AT commands over UART, for long-range sensors and LoRa point-to-point networks.

Product overview

RAKwireless RAK4270. The RAK4270 is a sub-GHz LoRaWAN module from RAKwireless integrating an STM32L071 microcontroller and an SX1262 LoRa radio chip in a compact 15 x 15.5 x 2.5 mm form factor.

Radio performance. The module supports eight spreading factors, from SF5 to SF12, and a signal bandwidth adjustable from 7.8 kHz to 500 kHz, with a data rate of 0.018 to 62.5 kb/s. Its sensitivity in LoRa modulation reaches -138 dBm and its maximum output power in transmit mode is 22 dBm on PA_BOOST. It complies with the LoRaWAN 1.0.2 protocol.

Power consumption. The module consumes 2.31 µA typical at 3.3 V in the US915 condition and 2.19 µA typical at 3.3 V in the EU868 condition, with a minimum of 1.61 µA at 2.0 V. The supply voltage range is 2.0 to 3.6 V and the operating temperature range is -40°C to +85°C.

Interfaces. The module provides a UART interface for AT commands, an I2C interface and GPIO pins. It is driven from an external controller by a set of AT commands that control the module state as well as the LoRaWAN communication parameters and payloads. The SWDIO and SWCLK programming pins are accessible.

Frequency and certifications. This variant is set to the AS923 frequency plan and has no MHF connector, the antenna being connected through the RF pinout. The module is certified CE, FCC, KC, REACH and RoHS.

Typical uses. The module suits smart meters, supply chain and logistics tracking, agricultural sensors and smart city applications that require long-range data acquisition with low power consumption.

Integration. The module comes as a 20-pin stamp for SMT board-to-board soldering. A breakout board, supplied separately, gives access to the pins through 2.54 mm headers for debugging.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: AS923
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote