SEN0250
6-Axis I2C Inertial Motion Sensor

- Acceleration Range
- ±2g/±4g/±8g/±16g
- Interface
- Gravity-I2C
- Current consumption
- <1mA
- Programmable Frequency
- 25/32Hz~1600Hz
6-Axis I2C Inertial Motion Sensor
DFRobot Gravity Sensor & Actuator System
The SEN0250 is a DFRobot 6-axis inertial motion sensor combining an accelerometer and a gyroscope, for motion detection, inclination measurement and step counting.
Overview. The Gravity: I2C BMI160 6-Axis Inertial Motion Sensor SEN0250 from DFRobot is a 6-axis inertial sensor. It integrates a 16-bit 3-axis accelerometer and a 3-axis gyroscope, based on the Bosch BMI160 6-axis MEMS sensor.
Main characteristics. Acceleration ranges of ±2g, ±4g, ±8g and ±16g, gyroscope ranges of ±125°/s, ±250°/s, ±500°/s, ±1000°/s and ±2000°/s. Acceleration zero-g offset of ±40mg and gyroscope zero-g offset of ±10°/s. Programmable frequency from 25/32Hz to 1600Hz. Built-in 1024 byte FIFO and two independent programmable interrupt generators. 6D detection and location, 16-bit data output.
Interfaces and power. Gravity-I2C interface with I2C level conversion circuit, compatible with Arduino 3.3V and 5V microcontrollers. Operating voltage of 3.2V to 6V through a built-in LDO power management chip. Current consumption below 1mA.
Environment. Working temperature from -40℃ to +85℃. Shock resistance of 1000g for 200µs. Dimensions 22 x 27mm.
Typical uses. Step counting and fitness tracking, inclination measurement, acceleration detection and switching of the display between horizontal and vertical modes. The sensor ships with a Gravity I2C/UART sensor cable and a XH2.54 4-pin single row pin header.
Integration. The sensor connects directly to a microcontroller over the I2C bus. Step-counting functions are read directly through registers.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0250, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Current consumption | <1mA |
| Acceleration Range | ±2g/±4g/±8g/±16g |
| Acceleration Zero-g Offset | ±40mg |
| Dimension | 22X27mm/0.87x1.06 in |
| Gravity | I2C BMI160 6-Axis Inertial Motion Sensor |
| Gyroscopes Range | ±125°/s,±250°/s,±500°/s,±1000°/s,±2000°/s |
| Gyroscopes Zero-g Offset | ±10°/s |
| Interface | Gravity-I2C |
| Operating Voltage | 3.2V~6V |
| Programmable Frequency | 25/32Hz~1600Hz |
| Shock Resistance | 1000gx 200us |
| Working temperature | -40℃~+85℃ |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0250. For a missing document or a specific revision, our experts send it to you.
The SEN0250 is a DFRobot 6-axis inertial motion sensor combining an accelerometer and a gyroscope, for motion detection, inclination measurement and step counting.
| Parameter | Value |
|---|---|
| Current consumption | <1mA |
| Acceleration Range | ±2g/±4g/±8g/±16g |
| Acceleration Zero-g Offset | ±40mg |
| Dimension | 22X27mm/0.87x1.06 in |
| Gravity | I2C BMI160 6-Axis Inertial Motion Sensor |
| Gyroscopes Range | ±125°/s,±250°/s,±500°/s,±1000°/s,±2000°/s |
| Gyroscopes Zero-g Offset | ±10°/s |
| Interface | Gravity-I2C |
| Operating Voltage | 3.2V~6V |
| Programmable Frequency | 25/32Hz~1600Hz |
| Shock Resistance | 1000gx 200us |
| Working temperature | -40℃~+85℃ |
Answers to the questions that the recorded characteristics of SEN0250 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": I2C BMI160 6-Axis Inertial Motion Sensor.
Yes — recorded under "Acceleration Range": ±2g/±4g/±8g/±16g.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
6-Axis I2C Inertial Motion Sensor

Gravity: I2C LIS2DW12 Triple Axis Accelerometer Sensor (±2g/±4g/±8g/±16g)

Gravity: I2C LIS331HH Triple Axis Accelerometer (±6g/±12g/±24g)

Gravity: I2C H3LIS200DL Triple Axis Accelerometer (±100g/±200g)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0250 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details