SEN0468
Calibrated chlorine CL2 sensor with I2C and UART outputs

- Detection range
- 0~20ppm
- Working current
- <5mA
- Storage humidity
- 15~90%RH (non-condensing)
- Storage Temperature
- -20~50℃
Calibrated chlorine CL2 sensor with I2C and UART outputs
DFRobot Gravity Sensor & Actuator System
Electrochemical chlorine (CL2) concentration sensor with analog, I2C and UART outputs, factory-calibrated, for chlorine detection in chemical, pharmaceutical and environmental applications.
Overview. The DFRobot SEN0468 is a chlorine (CL2) sensor based on the electrochemical principle, supplied with its probe and a Gravity signal conversion board. The probe is calibrated at the factory and quickly measures the chlorine concentration in the ambient air.
Main characteristics. The detection range is 0 to 20 ppm. The probe offers strong anti-interference ability, high stability and high sensitivity. Its service life is more than 2 years in the air. The sensor integrates a temperature compensation algorithm and a threshold alarm function.
Interfaces and connectivity. Three output modes are available: analog, I2C and UART (0 to 3 V). The sensor provides 32 modifiable I2C addresses, allowing several units to share one bus. Connection is made with a 4-pin Gravity cable.
Power and environment. Working voltage of 3.3 to 5.5 V DC for a current below 5 mA. Working and storage temperatures from -20 to 50 °C, humidity from 15 to 90 %RH non-condensing. Adapter plate size: 37 × 32 mm.
Typical uses. Chlorine detection in chemical processes, chlorine monitoring in pharmaceutical production and use in environmental protection devices.
Integration. Compatible with Arduino, ESP32 and Raspberry Pi. The DFRobot Gravity series comprises twelve gas sensors that share the same usage and data format, so they can be combined as needed.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0468, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Adapter Plate Size | 37*32mm |
| Compatibility | Arduino, ESP32, Raspberry pi |
| Detection Gas | Chlorine (CL2) |
| Detection range | 0~20ppm |
| Gravity | CL2 Sensor (Calibrated) - I2C & UART |
| Lifespan | >2 years (in the air) |
| Output signal | I2C, UART (0~3V), analog voltage |
| Storage humidity | 15~90%RH (non-condensing) |
| Storage Temperature | -20~50℃ |
| Working current | <5mA |
| Working humidity | 15~90%RH (non-condensing) |
| Working temperature | -20~50℃ |
| Working voltage | 3.3~5.5V DC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0468. For a missing document or a specific revision, our experts send it to you.
Electrochemical chlorine (CL2) concentration sensor with analog, I2C and UART outputs, factory-calibrated, for chlorine detection in chemical, pharmaceutical and environmental applications.
| Parameter | Value |
|---|---|
| Adapter Plate Size | 37*32mm |
| Compatibility | Arduino, ESP32, Raspberry pi |
| Detection Gas | Chlorine (CL2) |
| Detection range | 0~20ppm |
| Gravity | CL2 Sensor (Calibrated) - I2C & UART |
| Lifespan | >2 years (in the air) |
| Output signal | I2C, UART (0~3V), analog voltage |
| Storage humidity | 15~90%RH (non-condensing) |
| Storage Temperature | -20~50℃ |
| Working current | <5mA |
| Working humidity | 15~90%RH (non-condensing) |
| Working temperature | -20~50℃ |
| Working voltage | 3.3~5.5V DC |
Answers to the questions that the recorded characteristics of SEN0468 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": CL2 Sensor (Calibrated) - I2C & UART.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Calibrated chlorine CL2 sensor with I2C and UART outputs

Gravity: H2S Sensor (Calibrated) - I2C & UART

Gravity: NH3 Sensor (Calibrated) - I2C & UART

Gravity: 1602 LCD Keypad Shield For Arduino

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0468 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details