SEN0469
Calibrated NH3 Ammonia Gas Sensor with I2C and UART Output

- Detection range
- 0~100ppm
- Working current
- <5mA
- Storage humidity
- 15~90%RH (non-condensing)
- Storage Temperature
- -20~50℃
Calibrated NH3 Ammonia Gas Sensor with I2C and UART Output
DFRobot Gravity Sensor & Actuator System
Electrochemical ammonia (NH3) concentration sensor with a 0 to 100 ppm range, factory-calibrated, for ammonia detection in industrial and environmental applications.
Overview. The SEN0469 from DFRobot is an electrochemical NH3 (ammonia) gas sensor measuring ammonia concentration in the environment over a range of 0 to 100 ppm. The probe is factory-calibrated for quick and accurate measurement.
Main characteristics. The sensor offers strong anti-interference capability, high stability and high sensitivity. Its service life is more than 2 years in air. It integrates a temperature compensation algorithm and a threshold alarm function.
Interfaces and connectivity. The sensor provides I2C, UART (0 to 3 V) and analog voltage outputs. It offers 32 modifiable I2C addresses. Its 4-pin Gravity connector and signal conversion board simplify wiring.
Power and environment. Working voltage 3.3 to 5.5 V DC, working current below 5 mA. Working and storage temperatures from -20 to 50 ℃, working humidity from 15 to 90 %RH non-condensing.
Typical uses. Industrial ammonia detection and environmental protection devices. Compatible with Arduino, ESP32 and Raspberry Pi controllers.
Integration. Sample code is provided to quickly build an ammonia concentration detector.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0469, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Adapter Plate Size | 37*32mm |
| Compatibility | Arduino, ESP32, Raspberry pi |
| Detection Gas | Ammonia (NH3) |
| Detection range | 0~100ppm |
| Gravity | NH3 Sensor (Calibrated) - I2C & UART |
| Lifespan | >2 years (in the air) |
| Output signal | I2C, UART (0~3V), analog voltage |
| Storage humidity | 15~90%RH (non-condensing) |
| Storage Temperature | -20~50℃ |
| Working current | <5mA |
| Working humidity | 15~90%RH (non-condensing) |
| Working temperature | -20~50℃ |
| Working voltage | 3.3~5.5V DC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0469. For a missing document or a specific revision, our experts send it to you.
Electrochemical ammonia (NH3) concentration sensor with a 0 to 100 ppm range, factory-calibrated, for ammonia detection in industrial and environmental applications.
| Parameter | Value |
|---|---|
| Adapter Plate Size | 37*32mm |
| Compatibility | Arduino, ESP32, Raspberry pi |
| Detection Gas | Ammonia (NH3) |
| Detection range | 0~100ppm |
| Gravity | NH3 Sensor (Calibrated) - I2C & UART |
| Lifespan | >2 years (in the air) |
| Output signal | I2C, UART (0~3V), analog voltage |
| Storage humidity | 15~90%RH (non-condensing) |
| Storage Temperature | -20~50℃ |
| Working current | <5mA |
| Working humidity | 15~90%RH (non-condensing) |
| Working temperature | -20~50℃ |
| Working voltage | 3.3~5.5V DC |
Answers to the questions that the recorded characteristics of SEN0469 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": NH3 Sensor (Calibrated) - I2C & UART.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Calibrated NH3 Ammonia Gas Sensor with I2C and UART Output

Gravity: H2S Sensor (Calibrated) - I2C & UART

Gravity: CL2 Sensor (Calibrated) - I2C & UART

Gravity: 1602 LCD Keypad Shield For Arduino

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0469 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details