SEN0681
RS485 Fluorescence Dissolved Oxygen Sensor for Seawater

- Operating Temperature
- 0-40°C
- Measuring Range
- 0-20mg/L, 0-200% Saturation
- Communication interface
- RS485 (Standard ModBus-RTU Protocol)
- Power consumption
- 0.2W
RS485 Fluorescence Dissolved Oxygen Sensor for Seawater
Fluorescence dissolved oxygen sensor for high-salinity water, for monitoring marine aquaculture, oceanographic buoys and environmental monitoring stations.
Overview. The DFRobot SEN0681 is an RS485 fluorescence dissolved oxygen sensor designed for seawater and high-salinity environments. It measures across a 0-20 mg/L (0-200% saturation) range with a resolution of 0.01 mg/L. The fluorescence method does not consume oxygen during measurement and requires no electrolyte or electrochemical cell replacement.
Main characteristics. Response time ≤60 s, measurement error ±3% FS and ±0.5°C at 25°C, fluorescent film lifespan of one year under normal use, power consumption of 0.2 W. The corrosion-resistant plastic casing combines an IP68 waterproof rating with a pressure resistance of 0.6 MPa for prolonged submersion.
Interfaces and connectivity. RS485 interface with standard Modbus-RTU protocol, 5 m cable. A built-in temperature sensor provides automatic temperature compensation.
Power and environment. DC10-30V power supply, operating temperature of 0-40°C.
Typical uses. Automated mariculture and aquaculture monitoring, oceanographic data buoys, long-term environmental monitoring stations, estuary and coastal water quality analysis, process control in saline solutions. Can be connected to PLCs, data loggers or other industrial monitoring systems.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0681, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Response time | ≤60s |
| Cable Length | 5m |
| Casing material | Corrosion-Resistant Plastic |
| Communication interface | RS485 (Standard ModBus-RTU Protocol) |
| Fluorescent Film Lifespan | 1 year under normal use |
| Measurement Error | ±3% FS; ±0.5°C (25°C) |
| Measurement Principle | Fluorescence |
| Measuring Range | 0-20mg/L, 0-200% Saturation |
| Operating Temperature | 0-40°C |
| Power consumption | 0.2W |
| Power supply | DC10-30V |
| Pressure Resistance | 0.6MPa |
| Resolution | 0.01mg/L; 0.1%; 0.1°C |
| Waterproof rating | IP68 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0681. For a missing document or a specific revision, our experts send it to you.
Fluorescence dissolved oxygen sensor for high-salinity water, for monitoring marine aquaculture, oceanographic buoys and environmental monitoring stations.
| Parameter | Value |
|---|---|
| Response time | ≤60s |
| Cable Length | 5m |
| Casing material | Corrosion-Resistant Plastic |
| Communication interface | RS485 (Standard ModBus-RTU Protocol) |
| Fluorescent Film Lifespan | 1 year under normal use |
| Measurement Error | ±3% FS; ±0.5°C (25°C) |
| Measurement Principle | Fluorescence |
| Measuring Range | 0-20mg/L, 0-200% Saturation |
| Operating Temperature | 0-40°C |
| Power consumption | 0.2W |
| Power supply | DC10-30V |
| Pressure Resistance | 0.6MPa |
| Resolution | 0.01mg/L; 0.1%; 0.1°C |
| Waterproof rating | IP68 |
Points to check before using SEN0681 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Power consumption | 0.2W |
| Power supply | DC10-30V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0681 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication interface": RS485 (Standard ModBus-RTU Protocol).
Yes — recorded under "Communication interface": RS485 (Standard ModBus-RTU Protocol).
0-40°C (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
RS485 Fluorescence Dissolved Oxygen Sensor for Seawater

RS485 Fluorescence Dissolved Oxygen Sensor (Freshwater)

Dissolved Oxygen Sensor

Dissolved oxygen sensor

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0681 |
| Manufacturer | DFRobot |
Oxygen Sensors
Fluorescence dissolved oxygen sensor with RS-485 and 4-20mA · Ref. : WQ-DO-4A
Price on request
Oxygen Sensors
Drinking Water Dissolved Oxygen Sensor Probe · Ref. : ADVANCED_DRINKING_WATER_DISSOLVED_OXYGEN_SENSOR_PROBE
Price on request
Oxygen Sensors
Wall-Mounted Oxygen Transmitter with RS485 Output · Ref. : OXYGEN-SENSOR
Price on request
Oxygen Sensors
Industrial dissolved oxygen sensor, 0-20 mg/L range · Ref. : DOG-209FA
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details